A. T. Asbeck, S. M. M. De Rossi, I. Galiana, Y. Ding, C. J. Walsh, Dec. 2014, Stronger, Smarter, Softer: Next- Generation Wearable Robots, IEEE Robotics and Automation Magazine, Vol. 21, No. 4, pp. 22-23

C. Nabeshima, K. Ayusawa, C. Hochberg, E. Yoshida, July 2018, Standard Performance Test of Wearable Robots for Lumber Support, IEEE Robotics and Automation Letters, Vol. 3, No. 3, pp. 2182-2189

J. H. Choo, J. H. Park, Aug. 2017, Increasing Payload Capacity of Wearable Robots Using Linear Actuators, IEEE/ ASME Trans. Mech., Vol. 22, No. 4, pp. 1663-1673

J. M. Seo, S. H. Ryu, J. H. Kim, J. H. Choi, I. S. Jung, June 2010, Design of Axial Flux Permanent Magnet Brushless DC Motor for Robot Joint Module, in Proc. IEEE Int. Power Elec. Conf., pp. 1336-1340

S. W. Hwang, M. S. Lim, J. P. Hong, July 2016, Hysteresis Torque Estimation Method Based on Iron-Loss Analysis of Permament Magnet Synchronous Motor, IEEE Trans. Magn., Art. No. 8204904, Vol. 52, No. 7

T. Sun, J. M. Kim, G. H. Lee, J. P. Hong, M. R. Choi, May 2011, Effect of Pole and Slot Combination on Noise and Vibration in Permanent Magnet Synchronous Motor, IEEE Trans. Magn., Vol. 47, No. 5, pp. 1038-1041

J. M. Kim, M. H. Yoon, J. P. Hong, S. I. Kim, Sept. 2016, Analysis of Cogging Torque Caused by Manufacturing Tolerances of Surface-Mounted Permanent Magnet Synchronous Motor for Electric Power Steering, IET Electr. Power Appl., Vol. 10, No. 8, pp. 691-696

M. R. Park, J. W. Jung, D. Y. Kim, J. P. Hong, M. S. Lim, March/April 2019, Design of High Torque Density Multi-Core Concentrated Flux-Type Synchronous Motors Considering Vibration Characteristics, IEEE Trans. Ind. Appl., Vol. 55, No. 2, pp. 1351-1359

M. Valavi, A. Nysveen, R. Nilssen, R. D. Lorenz, T. Rolvag, May 2014, Influence of Pole and Slot Combinations on Magnetic Forces and Vibration in Low-Speed PM Wind Generator, IEEE Trans. Magn., Art. No. 8700111, Vol. 50, No. 5

J. F. Gieras, C. Wang, J. C. Lai, 2006, Radial Forces in Synchronous Machines with Slotted Stator, in Noise of Polyphase of Electric Motors, CRC Press Taylor & Francis Group, LLC, pp. 51-53

D. Y. Kim, M. R. Park, J. H. Sim, J. P. Hong, Aug. 2017, Advanced Method of Selecting Number of Poles and Slots for Low-Frequency Vibration Reduction of Traction Motor for Elevator, IEEE/ASME Trans. Mech., Vol. 22, No. 4, pp. 1554-1562

M. S. Lim, S. H. Chai, J. P. Hong, Mar. 2015, Design and Verification of 150-krpm PMSM Based on Experiment Results of Prototype, IEEE Trans. Ind. Electron, Vol. 62, No. 12, pp. 7827-7836

J. Y. Choi, May 2011, Quasi-3D analysis of Axial Flux Permanent Magnet Rotating Machines using Space Harmonic Methods, Transactions of the Korean Institute of Electrical Engineers, Vol. 60, No. 5, pp. 942-948

K. C. Min, H. B. Kang, M. K. Park, H. W. Cho, J. Y. Choi, Sept. 2014, Eddy Current Loss Analysis in Radial Flux Type Synchronous Permanent Magnet Coupling using Space Harmonic Methods, Transactions of the Korean Institute of Electrical Engineers, Vol. 63, No. 10, pp. 1377-1383

S. W. Suh, M. M. Koo, H. B. Kang, J. Y. Choi, Jan. 2015, Comparison and Analysis of Armature Reaction Magnetic Field of Linear Generator with Coreless/Cored Type Three Phases Concentrated Winding by using Space Harmonic Analytical Method, Transactions of the Korean Institute of Electrical Engineers, Vol. 64, No. 1, pp. 64-71

J. Hur, Jun. 2008, Characteristic Analysis of Interior Permanent- Magnet Synchronous Motor in Electrohydraulic Power Steering Systems, IEEE Trans. Ind. Electron, Vol. 55, No. 6, pp. 2316-2323