Sung Eun Kim, Sung Chan Yoo, and Hyun-Gil Kim, “An Optimization of Manufacturing Process of SS304L Using Direct Energy Deposition Method,” Korean Journal of Metals and Materials, vol. 60, no. 11, pp. 819-826, 2022.

F. Trevisanand, F. Calignanoand, M. Lorussoand, J. Pakkanenand, A. Aversa, E. P. Ambrosio, and D. Manfredi, “On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties,” Materials. vol. 10, no. 76, 2017.

L. N. Carter, C. Martin, P. J. Withers, and M. M. Attallah, “The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy,” Journal of Alloys and Compounds. vol. 615, no. 338, 2014.

Sun, Yu, Rainer J. Hebert, and Mark Aindow, “Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel,” Materials & Design, vol. 156, pp. 429-440, 2018.

Seung-Ho Lee, Jong-Cheon Yoon, Du-rim Eo, Si-Mo Yeon, and Kyun-Suk Choi, “Changes in Microstructure and Mechanical Properties of 17-4PH Stainless Steel according to the Application of Laser Rotation in the Powder Bed Fusion(PBF) Process,” Korean Journal of Metals and Materials, vol. 61, no. 6, pp. 397-403, 2023.

Yeong-gyeong Kim, Du-Rim Eo, Seung-ho Lee, and Kyun-suk Choi, “Microstructure and mechanical properties on the Down-skin area of 17-4 PH Stainless Steel processed by laser-powder bed fusion,” The Korean Institute of Electrical Engineers, pp. 32-32, 2023.

Vittorio Viale, John Stavridis, Alessandro Salmi, Federica Bondioli, AbdollahSaboori, “Optimisation of downskin parameters to produce metallic parts via laser powder bed fusion process: An overview,” The International Journal of Advanced Manufacturing Technology, vol. 123, no. 1, pp. 2159-2182, 2022.

Sun, Yu, Rainer J. Hebert, and Mark Aindow, “Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel,” Materials & Design 156, pp. 429-440, 2018.

Du-Rim Eo, Jongcheon Yoon, and Hyub Lee, “Heterostructure effect at the interface of maraging steel deposited upon carbon steel via directed energy deposition,” Materials & Design 225, 111574, 2023.

Jaidyn Jones, Ana Vafadar, and Reza Hashemi, “A Review of the Mechanical Properties of 17-4PH Stainless Steel Produced by Bound Powder Extrusion,” J. Manuf. Mater. Process, vol. 7, no. 5, pp. 162, 2023.