• 대한전기학회
Mobile QR Code QR CODE : The Transactions of the Korean Institute of Electrical Engineers
  • COPE
  • kcse
  • 한국과학기술단체총연합회
  • 한국학술지인용색인
  • Scopus
  • crossref
  • orcid
The Transactions of the Korean Institute of Electrical Engineers

The Transactions of the Korean Institute of Electrical Engineers

ISO Journal TitleTrans. Korean. Inst. Elect. Eng.
SCImago Journal & Country Rank

Journal Search

  1. Home
  2. Archive
  3. 2024-12 (Vol.73 No.12)
  4. 10.5370/KIEE.2024.73.12.2439
XML PDF INFO REF

References

1 
K. Forrester, R. Sheridan, and R. D. Phoenix, “Assessing the Accuracy of Casting and Additive Manufacturing Techniques for Fabrication of a Complete Palatal Coverage Metal Framework,” Journal of Prosthodontics, vol. 28, no. 7, pp. 811-817, 2019.DOI
2 
J. Wu et al., “A study on the fabrication method of removable partial denture framework by computer-aided design and rapid prototyping,” Rapid Prototyping Journal, vol. 18, no. 4, pp. 318-323, 2012.DOI
3 
S. Hama Suleiman, and P. Vult von Steyern, “Fracture strength of porcelain fused to metal crowns made of cast, milled or laser-sintered cobalt-chromium,” Acta Odontologica Scandinavica, vol. 71, no. 5, pp. 1280-1289, 2013.DOI
4 
R. J. Williams, R. Bibb, and T. Rafik, “A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying,” The Journal of Prosthetic Dentistry, vol. 91, no. 1, pp. 85-88, 2004.DOI
5 
R. van Noort, “The future of dental devices is digital,” Dental Materials, vol. 28, no. 1, pp. 3-12, 2012.DOI
6 
M. Braian et al., “Geometrical accuracy of metallic objects produced with additive or subtractive manufacturing: A comparative in vitro study,” Dental Materials, vol. 34, no. 7, pp. 978-993, 2018.DOI
7 
H. Rudolph et al., “Accuracy of intraoral and extraoral digital data acquisition for dental restorations,” Journal of Applied Oral Science, vol. 24, no. 1, pp. 85-94, 2016.DOI
8 
J. Schweiger, D. Edelhoff, and J. Güth, “3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing,” Journal of Clinical Medicine, vol. 10, no. 9, pp. 2010, 2021.DOI
9 
Y. Tian et al., “A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications,” Scanning, vol. 2021, pp. 1-19, 2021.DOI
10 
Y. S. Han et al., “Topology optimization of continuum tructures under hybrid additive-subtractive manufacturing constraints,” Structural and Multidisciplinary Optimization, vol. 60, no. 6, pp. 2571-2595, 2019.DOI
11 
M. Revilla‐León, and M. Özcan, “Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry,” Journal of Prosthodontics, vol. 28, no. 2, pp. 146-158, 2019.DOI
12 
S. Hwang et al., “Process parameter optimization for removable partial denture frameworks manufactured by selective laser melting,” The Journal of Prosthetic Dentistry, vol. 129, no. 1, pp. 191-198, 2023.DOI
13 
H. Ali, H. Ghadbeigi, and K. Mumtaz, “Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V,” Materials Science & Engineering. A, Structural Materials : Properties, Microstructure and Processing, vol. 712, pp. 175-187, 2018.DOI
14 
A. Fardan et al., “Effect of Part Thickness and Build Angle on the Microstructure, Surface Roughness, and Mechanical Properties of Additively Manufactured IN-939,” Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, vol. 54, no. 5, pp. 1792-1807, 2023.DOI
15 
K. A. Mumtaz, P. Erasenthiran, and N. Hopkinson, “High density selective laser melting of Waspaloy,” Journal of Materials Processing Technology, vol. 195, (1-3), pp. 77-87, 2008.DOI
16 
K. Ma et al., “Feasibility study and material selection for powder-bed fusion process in printing of denture clasps,” Computers in Biology and Medicine, vol. 157, pp. 106772-106772, 2023.DOI
17 
Y. Zhou et al., “Effects of post-treatment on metal-ceramic bond properties of selective laser melted Co-Cr dental alloy. Part 1: Annealing temperature,” The Journal of Prosthetic Dentistry, vol. 129, no. 4, pp. 657.e1-657.e9, 2023.DOI
18 
H. Chen et al., “Effects of selective laser melting process parameters on the accuracy of the intaglio surface of maxillary removable partial denture frameworks,” Rapid Prototyping Journal, vol. 28, no. 9, pp. 1625-1635, 2022.DOI