G. Xu, “Study on the Influence of Parasitic Parameters on the Switching Characteristics and High Frequency Oscillation of SiC MOSFET,” Conference Proceedings of 2021 International Joint Conference on Energy, Electrical and Power Engineering, Lecture Notes in Electrical Engineering, vol. 899, 2022.DOI: 10.1007/978-981-19-1922-0_1.

Y. E. Choi, “CMV Effect Analysis According to Load Variations in Energy Storage System,” The Transactions of the Korean Institute of Electrical Engineers, vol. 72, no. 12, pp. 1768-1774, 2023.DOI: 10.5370/KIEE.2023.72.12.1768.

S. H. Kim, “A Study on the Cause of CMV and Leakage Current, and Mitigation Strategy on the Lithium-ion Battery of ESS,” The Transactions of the Korean Institute of Electrical Engineers, vol. 70, no. 1, pp. 61-71, 2021.DOI: 10.5370/KIEE.2021.70.1.061.

E. H. Y. Moa and Y. I. Go, “Large-scale Energy Storage System: Safety and Risk Assessment,” Sustainable Energy Research, vol. 10, no. 13, 2023.DOI: 10.1186/s40807-023-00082-z.

SOCOMEC S.A.S., “Common Mode Management in Battery Energy Storage Systems (BESS),” White Paper, 2021.

DigiKey Electronics, “Conducted and Radiated Emissions Reduction Techniques for Power Modules,” Technical Article, 2021.

S. M. Choi, “A Study on ESS Safety Evaluation Considering CMV,” Journal of the Korea Academia-Industrial Cooperation Society, vol. 24, no. 5, pp. 635-646, 2023.DOI: 10.5762/KAIS.2023.24.5.635.

S. M. Choi, “A Study on Characteristics and Modeling of CMV by Grounding Methods of Transformer for ESS,” Journal of the Korea Academia-Industrial Cooperation Society, vol. 22, no. 4, pp. 587-593, 2021.DOI: 10.5762/KAIS.2021.22.4.587.

D. Gonzalez, “Conducted EMI Reduction in Power Converters by Means of Periodic Switching Frequency Modulation,” IEEE Transactions on Power Electronics, vol. 22, no. 6, pp. 2271-2281, 2007.DOI: 10.1109/TPEL.2007.909183.

UL 9540, Standard for Safety for Energy Storage Systems and Equipment, Northbrook, IL: UL Standards, 2016.

IEC 62933, Electrical Energy Storage (EES) Systems – General Requirements, Geneva, Switzerland: IEC Standards, 2018.

IEC 62477-1, Safety Requirements for Power Electronic Converter Systems and Equipment – Part 1: General, Geneva, Switzerland: IEC Standards, 2012.

Samsung SDI, “CMV Measurement, E2A/E3 Battery Installation Manual,” Appendix 2, Jul. 2019.

LG Chem, “Installation Guide of Battery for ESS (2020),” Sep. 2019.

Scribbr, “Coefficient of Determination (R²), Calculation & Interpretation,” Scribbr, 2023.