L. Jian, K. T. Chau and J. Z. Jiang, “A Magnetic-Geared Outer-Rotor Permanent-Magnet Brushless Machine for Wind Power Generation,” IEEE Transactions on Industry Applications, vol. 45, no. 3, pp. 954-962, May-june. 2009. DOI:10.1109/TIA.2009.2018974

V. Antipov, A. Grozov and A. Ivanova, “Design Aspects for Permanent Magnet Synchronous Wind Power Generators,” 2023 Seminar on Industrial Electronic Devices and Systems (IEDS), Saint Petersburg, Russian Federation, pp. 26-29, 2023. DOI:10.1109/IEDS60447.2023.10426391

F. A. Machado, P. J. Kollmeyer, D. G. Barroso and A. Emadi, “Multi-Speed Gearboxes for Battery Electric Vehicles: Current Status and Future Trends,” IEEE Open Journal of Vehicular Technology, vol. 2, pp. 419-435, 2021. DOI:10.1109/OJVT.2021.3124411

H. Baninajar and J. Bird, “Electromagnetic Design of a Wave Energy Converter Magnetic Gear with a Torque Density Above 300Nm/L,” 2023 3rd International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME), Tenerife, Canary Islands, Spain, pp. 1-5, 2023. DOI:10.1109/ICECCME57830.2023.10253361

A. Shoaei and Q. Wang, “A High Torque Density Flux-Focusing Halbach Magnetic Gear for Electric Vehicle Applications,” 2022 IEEE 1st Industrial Electronics Society Annual On-Line Conference (ONCON), kharagpur, India, pp. 1-6, 2022. DOI:10.1109/ONCON56984.2022.10126858

X. Zhang, X. Guo and Y. Liu, “Comparative Study of An Outer-Rotor Magnetic-Gear-Integrated Brushless Motor under Two Magnetization Methods,” 2021 IEEE 4th International Electrical and Energy Conference (CIEEC), Wuhan, China, pp. 1-5, 2021. DOI:10.1109/CIEEC50170.2021.9510704

K. Iwaki, K. Ito and K. Nakamura, “Experimental Verification of Torque Density Improvement by Magnetic Interaction in 500 N·m IPM-Type Magnetic-Geared Motor,” IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1-5, Nov. 2023. DOI:10.1109/TMAG.2023.3291372

S. Gerber and R. -J. Wang, “Analysis of the end-effects in magnetic gears and magnetically geared machines,” 2014 International Conference on Electrical Machines (ICEM), Berlin, Germany, pp. 396-402, 2014. DOI:10.1109/ICELMACH.2014.6960211

B. S. Byeon, E. J. Park, S. Y. Jung and Y. J. Kim, “Consideration on the Selection of Torque Density for Magnetic Gear in Magnetic Geared Motor,” KIEE Summer Conference, pp. 1513-1514, 2024.

M. Amin Masoudi and S. A. Afsari, “The Optimal Design and an Analysis of a Hybrid W-Shaped IPM Rotor of Coaxial Magnetic Gear,” IEEE Access, vol. 12, pp. 81067-81074, 2024. DOI:10.1109/ACCESS.2024.3409531

E. A. Grunditz, S. T. Lundmark, M. Alatalo, T. Thiringer and A. Nordelöf, “Three traction motors with different magnet materials — Influence on cost, losses, vehicle performance, energy use and environmental impact,” 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), Monte Carlo, Monaco, pp. 1-13, 2018. DOI:10.1109/EVER.2018.8362387